Select currency
Request location from device
Requesting location from device...Unable to get location. Try again
Lewmar's Synchro blocks are engineered for speed, efficiency and superior handling. We use a combination of scientifically optimised block geometry, a Free-Spin bearing and self-aligning head to reduce friction and increase efficiency by up to 40% over budget blocks on mainsheet systems. Each component is perfectly synchronised with the movement of the rope, providing you with an easier, smoother transfer of power from deck to sail and less wear on your rope.
Features
Applications
Plain bearing blocks are typically used for heavy and static loads in:
The toggle heads of the halyard blocks are designed to fit on the studs commonly found at mast bases - check the diameter of the stud against the width of the block jaws and pin diameter.
50MM
| OPTIMUM LINE SIZE (MM) | MAX LINE SIZE (MM) | WORKING LOAD LIMIT (KG) |
|---|---|---|
| 6 | 10 | 450 |
| OPTIMUM LINE SIZE (IN) | MAX LINE SIZE (IN) | WORKING LOAD LIMIT (LB) |
|---|---|---|
| 1/4 | 3/8 | 990 |
60MM
| OPTIMUM LINE SIZE (MM) | MAX LINE SIZE (MM) | WORKING LOAD LIMIT (KG) |
|---|---|---|
| 8 | 10 | 800 |
| OPTIMUM LINE SIZE (IN) | MAX LINE SIZE (IN) | WORKING LOAD LIMIT (LB) |
|---|---|---|
| 5/16 | 3/8 | 1760 |
72MM
| OPTIMUM LINE SIZE (MM) | MAX LINE SIZE (MM) | WORKING LOAD LIMIT (KG) |
|---|---|---|
| 10 | 12 | 1100 |
| OPTIMUM LINE SIZE (IN) | MAX LINE SIZE (IN) | WORKING LOAD LIMIT (LB) |
|---|---|---|
| 3/8 | 1/2 | 2420 |
90MM
| OPTIMUM LINE SIZE (MM) | MAX LINE SIZE (MM) | WORKING LOAD LIMIT (KG) |
|---|---|---|
| 12 | 14 | 2000 |
| OPTIMUM LINE SIZE (IN) | MAX LINE SIZE (IN) | WORKING LOAD LIMIT (LB) |
|---|---|---|
| 1/2 | 9/16 | 4400 |
No literature available
Spares
No spares available
Products
If you would still like to add this to your basket, please click here:
