In the Flush Mitre Portlight the acrylic has been moved as far forward as possible to make it approximately flush with the mounting surface, to do this 12mm acrylic is used where portlights normally use 8 to 10mm. The outer frame as been made as flat as possible and the angled face of the Standard Portlight as been removed. This has increased the quantity of alloy in the frame.
The outer frame is powder coat black in colour to camouflage to the acrylic lens; this is more costly than the anodising that is normally used.
CE Approval
Approved for sail and power craft to CE12216.2(E), Category A, Area 2a
width (mm) | length (mm) | height (mm) | radii (mm) | cutout width (mm) | cutout lenth (mm) | cutout radi (mm) |
---|---|---|---|---|---|---|
180 | 490 | 4 | 5 | 161 | 471 | 5 |
width (in) | length (in) | height (in) | radii (in) | cutout width (in) | cutout lenth (in) | cutout radi (in) |
---|---|---|---|---|---|---|
7 5/64 | 19 9/32 | 5/32 | 3/16 | 6 11/32 | 18 35/64 | 3/16 |
No literature available
No spares available
If you would still like to add this to your basket, please click here: